Enhanced protection for enhanced PCB performance
Conformal coatings are designed to protect printed circuit boards and related equipment from their environment. Typically applied at 25-75μm, these coatings ‘conform’ to the contours of the board allowing for excellent protection and coverage, ultimately extending the working life of the PCB.
More info > Download product selector chart > Download product brochure >2K300
Two-part system offering enhanced thermal performance, offers resin protection with ease of coating application
2K350
Flame Retardant, high temperature resistant, thick two-part system.
2K500
Two-part system offering good abrasion resistance, mechanically strong resin protection with ease of coating application
2K550
Flame Retardant, abrasion resistant, thick two-part system.
2K850
Unique UV Cure two-part system with fast chemical cure - even in shadow areas.
2KPB
2K Part B Required for all 2K systems.
AFA
Excellent clarity, ideal for LED applications
AFA-G
Acrylic Conformal Coating Gel designed for use with the AFA range as a permanent masking or damming material or for coverage of sharp edges.
AFAF
Acrylic conformal coating formulated especially for use with selective coating machines using non-atomised film-coat applicators.
AFAS
An acrylic conformal coating formulated for use with selective coating machines, atomised spray applicators and manual HVLP spray guns.
APL
A flexible, fast drying transparent acrylic conformal coating
HFAC
HFAC is an acrylic conformal coating for a more environmentaly and opporator friendly process
HPA
A flexible, fast drying transparent acrylic conformal coating
MDT
MDT is a high purity solvent blend designed for use with Electrolube's acrylic conformal coating, HFAC.
FSC
FSC is fast drying and is designed to protect printed circuit boards
HCS
HCS is a fast curing solvent free silicone conformal coating with 100% solids and is formulated to meet the requirements of UL94 V-0.
LFCC
LFCC is a flexible, transparent, fast drying modified silicone conformal coating
DCA
DCA is a flexible, transparent and unique modified alkyd conformal coating
DCABL
specialist blue transparent conformal coating, designed to offer excellent protection for electronics operating in harsh environments
DCB
Black opaque coating provides camouflage of PCB design
DCE
DCE is a thixotropic version of DCA modified alkyd conformal coating designed to solve unwanted coating migration due to the capillary effect.
DCR
Red opaque coating provides camouflage of PCB design
DCT
High purity solvent blend for diluting Electrolube Conformal Coatings
PUC
PUC is a tough, flexible, modified polyurethane conformal coating
URC
highly flexible, low-odour urethane conformal coating offering superb adhesion to a wide variety of substrates.
CPL
CPL is a general purpose coating designed to protect printed circuit boards
FPC
Specialist ultra-thin conformal coating for cost effective application
LTC
Fast-drying, tough and highly flexible, modified synthetic rubber conformal coating.
CCRG
CCRG thixotropic gel has been specifically formulated to remove Electrolube's solvent resistant coatings
IMC
General cleaning of automated dispensing equipment
PCM
PCM is a flexible, solvent resistant latex for masking components
FTH
High purity, fast-drying solvent blend for diluting Electrolube Conformal Coatings
HFS
Fluorinated Solvent designed for use with FPC as a dilutant / cleaner
LOT
Electrolube LOT is a low odour thinner developed for use with URC conformal coating.
MDT
MDT is a high purity solvent blend designed for use with Electrolube's acrylic conformal coating, HFAC.
PTH
PTH is a high purity solvent blend designed for use with Electrolube's polyurethane based conformal coating
UAT
UAT is a high purity solvent blend designed for use with all Electrolube acrylic based conformal coatings.
UVCL
Single component conformal coating, which cures upon exposure to UV light
UVCLP
UVCLP is a part of the new generation of UV cure conformal coatings
UVCLX
UVCLX is a part of the new generation of UV cure conformal coatings